Accessories
Accessories for Firecom’s aerosol fire extinguishing system are designed using the most advanced technology and customised for every company sector and all specific protection requirements. All accessories have been designed to ensure maximum safety with the smallest footprint.
Customised accessories for all requirements
BOX-BC/01
BOX-BC/01
One-way junction box for fixed systems.
Device required to connect a generator to the control line.
BOX-BC/02
BOX-BC/02
Two-way junction box for fixed systems.
Device required to connect two generators to the control line.
KIT-LT02
KIT-LT02
Line-tester kit for testing fixed systems.
Accessory allowing the extinguishing lines to be tested for correct operation, for safe testing of fixed systems.
UA-5 LCD.2
UA-5 LCD.2
Auxiliary unit, 5-channel, for fixed systems.
The UA-5 LCD.2 functions as an interface between the fire alarm control panel and the Firecom aerosol generators. It manages up to 5 lines each made up of a maximum of 10 generators, and is able to perform 2 separate discharges (20+30 generators).
BULBO
BULBO
Automatic fire detection and suppression for compact spaces.
The Thermosensitive Bulb is a stand-alone fire detection and extinguishing device, specifically designed for small and enclosed environments such as electrical cabinets, control panels, containers, and technical rooms.
Thanks to its simplicity and reliability, it allows the creation of a fully autonomous fire suppression system when combined with our aerosol generators — with no need for external power supply or control panels.
This linear thermal sensor is temperature-sensitive: when the pre-set activation temperature is reached, the system automatically triggers the connected aerosol generator(s), ensuring rapid and effective extinguishing.
Each bulb can activate up to two aerosol generators.
Available activation temperatures: 68°C, 93°C, 141°C.
KUS
KUS
Extinguishing unit, type-approved for vehicle use.
The KUS unit is designed to detect fires inside vehicle engine and/or Webasto compartments, and activate the Firecom fire extinguishing generators. It operates both automatically (thanks to a heat-sensitive cable) and manually. It provides both audible and light signals.
Type approval: E24 *10R06/02*5917*00.
TERM088
TERM088
Heat-sensitive cable for electrical panels with alarm temperature 88° C.
The cable is a temperature-sensitive linear heat detector. Reaching the operating temperature threshold of 88°C causes the heat-sensitive polymer covering the cable to melt, causing a short circuit which activates the aerosol generator.
TERM138
TERM138
Heat-sensitive cable for vehicles with alarm temperature 138° C
The cable is a temperature-sensitive linear heat detector. Reaching the operating temperature threshold of 138°C causes the heat-sensitive polymer covering the cable to melt causing a short circuit which activates the aerosol generator.
TERM180
TERM180
Heat-sensitive cable for vehicles with alarm temperature 180° C
The cable is a temperature-sensitive linear heat detector. Reaching the operating temperature threshold of 180°C causes the heat-sensitive polymer covering the cable to melt causing a short circuit which activates the aerosol generator.
KIT-LT03
KIT-LT03
Line-tester kit for testing systems for vehicles.
Line-tester kit for testing systems for vehicles.
KIT-LT03
MARE 15
Control unit for systems for use in boats.
Self-powered central command and control unit which allows the system status to be monitored via LED indicators and the Firecom generator to be activated. Mare15 Electrical operation in manual mode with discharge delay of 5 sec., or automatically via a heat-sensitive cable.
Accessories for every need and requirement
Speak to one of our experts for a personalised consultancy session on the accessories best suited to your company.
Large companies have chosen us.
